Credit Card Machine User Manual

➤ When you perform a digital cut using the Pioneer

PRV-LX1 DVD recorder, select Ignore

Time in the Digital Cut Tool window.

➤ A video underrun might occur at the start of a digital cut if the Digital Cut tool does not have

focus when you click the Play Digital cut button. The Digital Cut window must be active

before you click either the Start or Preview button. If an underrun occurs at the very start of

the digital cut, you should be able to perform the digital cut without a problem.

➤ When you perform a digital cut to a Panasonic DVCPRO HD deck using HD-SDI with

720p/59.94 material, several frames of black might be written to tape before the start of the

outputted sequence. This might result in the end of the sequence being truncated on tape.

Workaround: Place several seconds of black or color bars at the end of a sequence.

➤ The Digital Cut tool does not allow certain durations of black to be added to the tail of a

sequence. Certain values (including 20 minutes, 30 minutes, 60 minutes, and so on) reset the

clock to zero when applied. If the value you entered resets to zero when applied, adjust the

value upward or downward until a satisfactory length is determined (at which point the clock

does not reset itself and the desired duration is correctly applied).

Dynamic Relink

➤ Any MPEG2 352_30I MXF media created with an x.8.1 or x.8.3 editing application will not

relink in Exact match in versions x.8.4 of the editing applications or the Media Composer

3.0 or Symphony 3.0 or NewsCutter 7.0 versions of the editing application. The MPEG2

352_30I MXF media created with an x.8.1 or x.8.3 was compressed at 15MB instead of

2MB and therefore will not relink in Exact match.

Workaround: Change the Dynamic Relink settings to use the “Most compressed” option

or change the “If no match is found” option to “Relink to Closest.”

➤ When working with HDV projects, HDV resolutions are not available for Dynamic Relink.

Workaround: Choose “Use Closest Media” instead of “Relink to Offline” when in HDV

projects and “Specific Resolution” is selected as the Relink Method. If you do not choose

“Use Closet Media”, captured clips appear as offline when Dynamic Relink is enabled.

➤ If you want to re-create title media at a target format other than the working format, you

must change the project format to that designated for the target, otherwise only the working

format resolutions are available.