User`s guide

Taiwan EMC Regulations

Examples are sonic (acoustic), radio frequency, infra-red, ultraviolet and ionizing

radiation, and high intensity visible and coherent light (lasers).

Examples of measures to reduce risks include:

- Limiting the energy level of potential radiation sources

- Screening radiation sources

- Provision of SAFETY INTERLOCKS

- Provision of markings to warn USERS where exposure to the radiation hazard is

unavoidable

6. Chemical hazards

Injury may result from contact with some chemicals or from inhalation of their vapors

and fumes.

Examples of measures to reduce risks include:

- Avoiding the use of constructional and consumable materials likely to cause injury

by contact or inhalation during intended and normal conditions of use

- Avoiding conditions likely to cause leakage or vaporization

- Provision of markings to warn USERS about the hazards

7. Safety warning statement for equipment that is under hazardous voltages

8. Equipment with touch current exceeding 3.5 mA

One of the following labels, or a label with similar wording, shall be affixed adjacent to

the equipment AC MAINS SUPPLY connection:

9. An EUT that provides TELECOMMUNICATIONS NETWORK connection ports

for connection of multiple items of other telecommunications equipment shall not

create a hazard for USERS and TELECOMMUNICATIONS NETWORK

SERVICE PERSONS due to summation of TOUCH CURRENT