User`s guide

Keyboard, Monitor, and Mouse Connections
27
Front Panel Screws
Keyboard, Monitor, and Mouse Connections
Use an industry standard USB keyboard, USB mouse and VGA monitor to access the File
Gateway Server. You can optionally use a KVM switch if several servers are installed in the
rack. The keyboard, monitor, and mouse connections use the ports described in the following
procedure. Follow the instructions supplied with your KVM switch. You must supply KVM
cables that are compatible with your KVM switch.
n
There are only two USB ports on the rear of the File Gateway server. One of the ports is
typically used for the application key. When you purchase your KVM switch make sure it
includes a USB splitter cable so that both your keyboard and mouse can plug into the splitter
cable and use a single USB port on the Engine.
The following figure shows the rear panel of the File Gateway server and the connections
used during the setup.
File Gateway Server USB and Monitor Ports
Rack enclosure
front mounting rail
Power supplies
Slots not used
Serial Intel Pro Ethernet ports VideoUSB