User`s guide

2 Connecting the ISIS Equipment

Securing the Outer Slide Rail to the Rear Rack-Mounting Rail

6. Repeat this procedure to attach the second outer slide rail on the other side of the rack.

Attaching the Outer Rails to a Round-Hole Rack

To attach the outer slide rails to the rack with round holes:

1. Locate the four round hole adapters (in the accessory kit's plastic bag, not in the rack

mount kit box) and position the adapter on the end of the outer slide rail bracket

assembly as shown in the following illustration.

Attaching the Round Hole Adapter to the Bracket Assembly

2. With the bracket assembly tabs aligning with the cut-out in the round hole adapter,

swing the adapter so that the holes face the front of the bracket assemble as shown in the

following illustration.

Round hole adapter

Outer slide rail bracket assembly

Bracket assembly tabs