User`s guide

Rack Mounting the File Gateway
21
Separating the Slide Rails
3. Pull and separate the two halves.
4. Repeat these steps to separate the second slide rail.
Attaching Inner Slide Rails to the File Gateway Server
Attach the inner slide rails that were separated from the outer slide rails to the File Gateway
server.
To attach the inner slide rails:
1. Position the inner slide rail against the side of the server so that the screw holes are
toward the rear of the server, and the front of the slide rail fits over the tab at the front of
the server.
2. Secure the inner slide rail to the server with two of the small screws.
n
The rail kit might contain more screws than needed.