Setup guide

Limitations
7
The id Interplay ReadMe
Limitations
The following limitations exist for migrating Interplay applications to AS3000 servers:
• The AS3000 servers are currently qualified on Interplay v2.3.
• The servers running Windows Server 2008 Standard require additional system settings
changes. See “Changing System Settings on Windows Server 2008 Standard Systems”
on page 12.
• As of this writing, Interplay Transfer is not supported on MediaNetwork on an AS3000.
Reference problem UDEVC00152485.
• Interplay engineering is in the process of qualifying a Fibre card for the Interplay
Engine cluster running on the AS3000. Until the qualification is complete, AS3000
servers are not supported as components in an Interplay Engine cluster or Interplay
Archive Engine cluster.
• SR2500 and AS3000 servers can reside in the same Interplay Production and Capture
environments except for Interplay Clustered Engines and Archive Engines. Both servers
in clustered configurations must be the identical hardware.
• The Interplay v2.3 Stream Server and related Workflow Engine require updated
installers for the AS3000 servers. Do not use the installers on the Interplay v2.3 Installer
DVD or Interplay v2.3 Installer USB flash drive. See your Avid representative for
information on obtaining the software. See “Qualified Software” on page 8.
• Telestream and Anystream software is in the process of being qualified on the AS3000.
Until the qualification is complete, ProEncode is not supported on the AS3000.
• Copy and Move Providers: The Chelsio cards used on Intel SR2400 and SR2500
systems are not supported on the AS3000. Use Myricom cards as described in
“Migrating a Copy Provider” on page 31 and “Migrating a Move Provider” on page 34.