Setup guide

40
To install the Fibre channel card:
1. Install the card in the either of the two PCIe slots as described in the AS3000 Setup
Guide. For convenience, use the bottom slot in case you need to add a second card at a
later time.
2. Reconnect and restart the system. See “Fibre Channel Card Drivers” on page 40.
3. If necessary, use one of the Pro/1000 PT ports for a network connection.
Fibre Channel Card Drivers
The drivers for an ATTO Fibre channel card (model CTFC-41ES-BR1) are pre installed on
the Windows 7 Pro 64-bit and Windows Server 2008 R2 Standard 64-bit images. If you
install this card, the system automatically recognizes the drivers after you install the card and
restart the system.
If Avid qualifies additional Fibre channel cards, this document will be updated with
information on obtaining the appropriate drivers. You can find the latest version of this
document on the Avid Knowledge Base.
If you find it necessary to locate the pre installed ATTO drivers, the installers are located in
the following location:
C:\Installables\drivers\HBA
Migrating a Media Services Database
For information on migrating a Media Services Engine, see “Migrating a Media Services
Engine” on page 28.
This section describes how to move your original Media Services database to a new system.
Move the database if your site uses a large number of Media Services profiles that you do
not want to recreate. If you have a relatively small number of profiles, it is easier to install a
new version of the Media Services Engine and recreate the profiles.
Checklist for Migrating the Media Services Database to an AS3000
Server
This topic describes how to move the Media Services database to the new AS3000 system in
order to maintain your existing profiles.
c
This is an advanced procedure and requires experience working with SQL databases.
Perform this procedure only if you have a large number of profiles that you want to
maintain.