Setup guide

36
Use the network connection to connect to the FlashNet server.
MediaNetwork Connection
For connection to Avid Unity MediaNetwork, insert the qualified Fibre Channel card in
either the top or bottom PCIe slot. See “MediaNetwork Connections” on page 39.
Port Usage for the Archive Provider (SGL only)
To enable the Archive Provider to communicate with the SGL FlashNet server, the network
must allow UDP and TCP traffic on the following ports:
• SQL server and monitor:
- 1433, 1434 TCP
- 1433, 1434 UDP
• FlashNet client: 8192 TCP
For other third-party archive solutions, see the third party documentation.
Migrating a Transcode Provider
Transcode Provider runs Windows 7 Pro 64-bit. The server does not require any PCIe cards.
Use one of the PRO/1000 PT ports (port 2 or port 4) for a network connection.
Migrating a Stream Server
The Interplay Stream Server is supported on an AS3000 server running Windows Server
2008 R2 Standard 64-bit. No additional PCIe cards are required.
For installation and configuration instructions see the Avid Interplay Software Installation
and Configuration Guide. For information on using the Stream Server, see the Interplay
Media Services Setup and User’s Guide.
Changing System Settings
Several system settings must be changed on the default Windows Server 2008 Standard
image. See “Changing System Settings on Windows Server 2008 Standard Systems” on
page 12.