Setup guide

18
Examine and Archive the Logs After Moving the Database
If you use the Collect tool, examine the Base Analyzer portion after moving the database
and users to the AS3000. This portion should run successfully without any errors. Archive
the output of the tool as a record of the state of the system after the move.
Migrating a Media Indexer
You can replace Intel SR2400 and SR2500 Media Indexers with AS3000 systems. The
Media Indexer runs Windows Server 2008 R2 Standard 64-bit. The server does not require
any PCIe cards.
Changing System Settings
Several system settings must be changed on the default Windows Server 2008 Standard
image. See “Changing System Settings on Windows Server 2008 Standard Systems” on
page 12.
ISIS Connections
The Media Indexer can be single connected or dual connected to ISIS. As with other
Interplay servers, use the Pro/1000 PT ports (2 and 4) for ISIS connections.
MediaNetwork Connection
For connection to Avid Unity MediaNetwork, insert the qualified Fibre Channel card in
either the top or bottom PCIe slot. See “MediaNetwork Connections” on page 39.
Replacing SR2500 Media Indexers in the HAG with AS3000 Media
Indexers
This topic describes how to replace SR2500 Media Indexers in the High Availability Group
(HAG) with AS3000 Media Indexers without taking the Interplay environment offline.
n
In this section, the term SR2500 Media Indexer also applies to an SR2400 Media Indexer.
This procedure takes advantage of one of the new features in Interplay v2.3: the ability to
export and import Media Indexer configurations. This topic describes how to export the MI
configuration from the SR2500 HAG leader and then import it to the new AS3000 MI. The
overall process is as follows:
• Install the 64-bit Media Indexer and Service Framework software on the AS3000 MI