Setup guide

A Safety and Regulatory Information
73
Make sure your rack enclosure is stable enough to prevent tipping over when one or
more Avid AS3000 servers are extended on the sliding rails.
• Circuit Overloading — Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might have
on overcurrent protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
• Reliable Grounding — Reliable grounding of rack-mounted equipment should be
maintained. Particular attention should be given to supply connections other than direct
connections to the branch circuit (for example, use of power strips).
• Inside Enclosure Access — If you want to extend the enclosure, and remove the top
cover, you must allow 0.5 in (1.3 cm) clearance on top of the enclosure for cover
removal.
LED Safety Notices