Setup guide

Installing and Removing a PCIe Add-in Card

9. Replace the top filler panel and attach the bezel retainer with two screws as shown in the

following illustration.

Replacing the Top Filler Panel and the Bezel Retainer

A. Top filler panel

B. Bezel retainer

Make sure that any empty add-in card slots have filler panels installed.

10. If you had removed the lateral movement support, replace the support by reconnecting the

two screws that hold it to the chassis.

11. Replace the system cover. See “Removing and Installing the System Cover” on page 45.

12. Reconnect all peripheral devices and the AC power cords into the server.