Setup guide

Installing and Removing a PCIe Add-in Card

6. Remove the bezel retainer by removing the two screws and removing the retainer.

Removing the Bezel Retainer and Filler Panels

A. Filler panels

B. Bezel retainer

7. Remove both filler panels.

When adding the first PCIe card, Avid recommends that you add it to the bottom slot unless the

Avid system requires the card to be in a designated slot. See your product specific documentation

for details.

8. Insert the card so that it fits into the slot and replaces the filler panel. Be sure to seat the tab

at the bottom of the card into the slot on the left side of the bezel. Be careful not to remove

the conductive gasket.