Setup guide

2 Installing the AS3000 System
28
8. Repeat this procedure to attach the second outer slide rail on the other side of the rack.
Securing the Avid AS3000 Server in a Rack
c
You should have someone helping you lift the Avid AS3000 server while you are
positioning it into the slide rails.
To secure the server to the rack enclosure:
1. Lift and position the server so that the inner slide rails (secured to the server) are aligned
with the outer slide rails secured to the rack.
2. Push the front of the Avid AS3000 server flush against the front mounting rail. The
holes in the server front panel align with the holes in the front mounting rail.
3. Do one of the following:
- For a square hole rack, insert the M6X10 screw into the middle hole of the outer rail
kit and tighten. This will anchor the server front panel to the vertical rail.
- For a round hole rack, use an appropriate screw to attach the server front panel to
the vertical rail of the rack. The size will vary depending on your rack hardware.
Front Panel Screws
Rack enclosure
front mounting rail