Setup guide

Installing AS3000 Hardware in a Rack

Insert the Outer Slide Rail to the Front Rack-Mounting Rail

5. Insert the small-short Phillips-head screws through the round-hole adapter and

mounting rail, into the bracket. The small screws that ship with the round hole adapters

are 10-32 screws. If the rack holes are a different size, you will need to supply

appropriate screws.

Securing the Outer Slide Rail to the Rack-Mounting Rail

6. Adjust the outer slide rail bracket assembly to the rear mounting rail.

7. Secure the rear outer slide rail bracket assembly to the rear mounting rail as you did for

the front rack-mounting rail.