Setup guide

2 Installing the AS3000 System
26
Attaching the Round Hole Adapter to the Bracket Assembly
3. With the bracket assembly tabs aligning with the cut-out in the round hole adapter,
swing the adapter so that the holes face the front of the bracket assembly as shown in the
following illustration.
Positioning the Round Hole Adapter to the Bracket Assembly
4. Slide the outer slide rail bracket assembly onto the side rack-mounting rail so that the
round hole adapter is over the rack rail.
n
You should have someone helping you hold the slide rails level while you are positioning
them in the rack.
Round hole adapter
Outer slide rail bracket assembly
Bracket assembly tabs