Setup guide

Installing AS3000 Hardware in a Rack
21
Separating the Slide Rails
You need to separate the slide rails and attach the inner “movable” section to the AS3000
and the outer “fixed” section to the rack rails.
To separate the slide rails:
1. Slide the slide rail completely open.
2. Press the arrow-shaped spring clip on the slide rail as shown in the following
illustration.
n
The blowup of the spring clip shown in the illustration is on the bottom side of the slide rail.
Separating the Slide Rails
3. Pull and separate the two halves.
4. Repeat these steps to separate the second slide rail.