Setup guide

2 Installing the AS3000 System
18
Avid AS3000 Server
The AS3000 ships with four on-board 1-Gb Ethernet ports. The AS3000 has two
autosensing power supply modules that operate from 100 to 240 VAC at 50 to 60 Hz. For
detailed specifications, see “Electrical” on page 67.
n
The Windows Product Key Certificate of Authenticity is attached to the top of the server.
The standard AS3000 components include the following:
• Data drives — Each server comes standard with two, 1TB, externally accessible,
enterprise class, 3.5 inch SATA disk drives. See “Replacing System Drives in the
AS3000” on page 38.
• Keyboard and mouse are optional on some models. See “Using a KVM to Connect a
Keyboard, Monitor, and Mouse” on page 29.
• Removable bezel and a package of bezel keys.
• Accessory kit — a plastic bag containing spare cables and the following items:
- Drive lock keys
- Drive carrier screws
- Power cables
- Hardware for the rack mount kit including round hole adapters
• All systems ship with a 22 to 32 inch rack mount kit. For deeper racks, you can
separately order a 28 to 37 inch rack mount kit. See “Installing AS3000 Hardware in a
Rack” on page 19.
• Ethernet cables — You need to supply Ethernet cables for the Avid AS3000 server
clients. See the Ethernet cabling section under “Supported Cabling” on page 69.
Optional line cards will require appropriate cables. See “Supported Cabling” on page 69.
n
Keep the accessories that ship in the AS3000. You might need them later for installing
optional disk drives or installing the server in a rack.
n
Keep the shipping boxes that come with your AS3000 hardware. You might need to
repackage and ship the components in the future.