Setup guide

AS3000 Hardware

System Drives

There are two system drives accessible from the front of the AS3000 enclosure. These two

drives are mirrored and if a failure occurs on either one of the system drives, you can pull the

failed drive out of the enclosure and install a replacement drive without turning off the

AS3000 enclosure. All AS3000 operations continue to run uninterrupted. See “Replacing

System Drives in the AS3000” on page 38.

Power Supplies

There are two power supplies accessible from the rear of the AS3000 enclosure. If a failure

occurs on either one of the power supplies, you can pull the failed power supply out of the

enclosure and install a replacement power supply without turning off the AS3000 enclosure.

All AS3000 operations continue to run uninterrupted. See “Replacing a Power Supply” on

page 56.