Product specifications

Using This Guide
Congratulations on the purchase of Interplay | Production, a powerful system for managing
media in a shared storage environment.
This guide is intended for all Interplay Production administrators who are responsible for
installing, configuring, and maintaining an Interplay | Engine with the Automatic Server Failover
module integrated. This guide is for Interplay Engine clusters that use Avid AS3000 servers.
Revision History
Date Revised Changes Made
October 9, 2014 Added note to use 8Gb/sec data rate for connection to HP MSA 2400. See “Changing
Default Settings for the ATTO Card on Each Node” on page 36
.
September 2014 • Added information for HP MSA 2400 storage array. See
“Server Failover
Requirements” on page 18
,
• Added procedure for removing the Application Server role. See
“Removing the
Application Server Role from Each Node” on page 38
.
• Added procedure for allowing IPv6 in a local firewall. See
“Configuring Local
Software Firewalls” on page 39
.
• Added instructions for re-enabling IPv6. See
“Enabling TCP/IPv6 in the
Registry” on page 128
.
April 2013 Added note that roaming profiles are not supported. See
“Requirements for Domain
User Accounts” on page 29
.
May 2013 Revisions to remove support for Infortrend A16F-R2431with the new ATTO
FC-81EN card, and to describe login to the ATTO Configuration Tool (
“Changing
Default Settings for the ATTO Card on Each Node” on page 36
.)
February 2013 Revisions to describe Rev. 4 image (including new appendix
“Windows Server
Settings Included in Revision 4 and Later Images” on page 116
).
November 2012 Moved information on preparing server from
“Preparing the Server for the Cluster
Service” on page 35
to “Windows Server Settings Included in Revision 4 and Later
Images” on page 116
.