Product specifications

Configuring the Cluster Service
73
4. Open the Server Manager and select Features > Failover Cluster Manager > cluster_name >
Storage. Make sure that the Quorum disk is online and that current owner is node 2, as
shown in the following illustration.
5. In the Server Manager, select Features > Failover Cluster Manager > cluster_name >
Networks. The status of all networks should be “Up.” The following illustration shows
networks for a dual-connected configuration.
6. Repeat the test by using the Command Prompt to move the cluster back to node 1.
Configuration of the cluster service on all nodes is complete and the cluster is fully operational.
You can now install the Interplay Engine.