Product specifications

Preparing the Server for the Cluster Service
47
4. In the Connections area, use the arrow controls to position the network connections in the
following order:
- For a redundant-switch configuration in an Avid ISIS environment, use the following
order:
-Public
-Private
- For a dual-connected configuration in an Avid ISIS environment, use the following
order, as shown in the illustration:
-Left
-Right
-Private
5. Click OK.
6. Repeat this procedure on node 2 and make sure the configuration matches on both nodes.
Configuring the Public Network Adapter on Each Node
Make sure you configure the IP address network interfaces for the public network adapters as
you normally would. For examples of public network settings, see
“List of IP Addresses and
Network Names” on page 31
.