Product specifications

Preparing the Server for the Cluster Service
44
5. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties dialog box opens.
6. On the General tab of the Internet Protocol (TCP/IP) Properties dialog box:
a. Select “Use the following IP address.”
b. IP address: type the IP address for the Private network connection for the node you are
configuring. See “List of IP Addresses and Network Names” on page 31
.
n
When performing this procedure on the second node in the cluster, make sure you assign a static
private IP address unique to that node. In this example, node 1 uses 192.168.100.1 and node 2
uses 192. 168. 100. 2.
c. Subnet mask: type the subnet mask address
n
Make sure you use a completely different IP address scheme from the one used for the public
network.
Type the private IP
address for the node
you are configuring.