Product specifications

Preparing the Server for the Cluster Service
42
5. Depending on your Avid network and the device you selected, type a new name for the
network connection and press Enter.
6. Repeat steps 4 and 5 for each network connection.
The following Network Connections window shows the new names used in a dual-connected
Avid ISIS environment.
7. Close the Network Connections window.
8. Repeat this procedure on node 2, using the same names that you used for node 1.
Configuring the Private Network Adapter on Each Node
Repeat this procedure on each node.
To configure the private network adapter for the heartbeat connection:
1. On node 1, click Start > Control Panel > Network and Sharing Center.
The Network and Sharing Center window opens.
2. Click “Change adapter settings” on the left side of the window.
The Network Connections window opens.
3. Right-click the Private network connection (Heartbeat) and select Properties.
The Private Properties dialog box opens.