Product specifications

B Enabling TCP/IPv6 in the Registry
Disabling the TCP/IPv6 protocol completely on Interplay Engine servers is no longer
recommended. IPv6 is enabled in Rev. 4 and later server images. However, binding network
interface cards (NICs) to IPv6 is not recommended. See
“Configuring the Public Network
Adapter on Each Node” on page 47
.
Some installations might have IPv6 disabled through the DisabledComponents registry key. The
following illustration shows the registry key set to disabled.
To enable IPv6, set the value of the DisabledComponents key to zero or remove the key from the
system. The following illustration shows the key set to zero.
The following procedure describes how to do this through a .reg file.