User guide

Artist Transport User Guide32
Assign
The Assign tab manages how tracks are assigned to strips on Artist Control or Artist Mix (not Artist Transport). By default, tracks
are automatically assigned in banks of four.
The following features pertain to the Artist Mix and Artist Control, not the Artist Transport:
• Display application’s track numbers
• Clear All Assignments
• Monitor and Control Room
See the Artist Mix or Artist Control User Guide to learn about these features.
Lock to Application
This feature lets the transport controls and/or the entire surface to stay locked to the application listed at the top-left of the dialog,
even when that application is not focused. The locked-to application also is the only application that will be affected by adjusting
the EuControl
Wheel Sensitivity settings.
Entire Surface Select this checkbox to lock the entire surface, including those of all linked Artist media controllers, to the listed ap-
plication.
Transport Select this checkbox to lock the transport controls of Artist Transport and Artist Control to the listed application. All
transport controls, including jog/shuttle wheels, are locked when selected.
Monitor and Control Room select this checkbox to lock the Monitor and Control Room controls to the listed application.
Assign tab
You can adjust the sensitivity of the wheels on both Artist Transport and Artist Control in the General tab. See “Wheel Sensitivity” on
page 30.