User guide

Artist Transport User Guide30
You can manually toggle control back and forth between your primary workstation and the attached external workstation by press-
ing Control+Option+\ (Mac), or Control+Alt+\ (Windows).
The
Redirect Keyboard and Mouse Control to Attached External Workstation option must be checked before adding the workstation
to the My Workstations list. If it is toggled ON after adding the workstation it will have no affect. Only workstations added with
the option checked will respond.
General
The General tab controls how the Artist Series controller and application software work together.
The following features pertain to Artist Mix and Artist Control, not Artist Transport:
• Workstation tracks knob set changes.
• Open plug-ins on workstation when editing
• Close plug-ins on workstation when editing
• Select by touch
• Auto-bank to selected track
• Display track numbers on surface
• Solo Mode
See the Artist Mix User Guide or Artist Control User Guide to learn about these features.
Wheel Sensitivity
The sensitivity of the Jog Wheel and Shuttle Ring can be precisely adjusted using the Wheel Sensitivity sliders. The top two sliders
pertain to the Artist Transport, the bottom is the Jog Wheel for the Artist Control.
The center position is the default for each control. Click and drag a slider to move it right for faster response or left for a slower,
more controlled movement. Click the
Reset button to restore the center position.
The name of the currently focused application is shown above the sliders (the application that will be affected by adjusting Wheel
Sensitivity). If the controls have been locked to a specific application, the display will list it and identify it as the application being
adjusted. For more information on locking, see “Lock to Application” on page 32.
General tab