User guide

Chapter 3: Artist Transport Operation 13
To lock the SHOW key:
1 Press and release the SHOW key quickly and then press another key to display its assignments. Continue browsing in this
manner until finished.
2 Press and release the SHOW key quickly again when finished to restore normal operation.
Soft Keys
The Soft Keys are factory programmed for each application. The six Soft Keys also let you access six additional functions by
holding down the
SHIFT key before pressing a Soft Key.
The Soft Keys can be reassigned within each application. See Chapter 4, “Soft Keys” to learn how to program them.
The Soft Keys light with a yellow LED when active.
Transport Keys
The Transport Keys are factory-programmed for each application. The top-most application determines the current Transport Key
assignments. The top-most (focused) application is defined as the one in use before switching to EuControl. The seven Transport
Keys can also access additional functions by holding down the
SHIFT key before pressing a Transport Key.
Transport keys can be reassigned within each application. See Chapter 4, “Soft Keys” to learn how to program them.
Each Transport Key lights with two LED colors to signify different functions. The left- and right-most two keys can be yellow or
red. The middle three can be yellow or green. The factory default assignments are application-specific and follow industry con-
ventions.
Soft keys
Transport key