User guide
Artist Transport User Guide20
Restore
Click Restore to restore the Application Set to its factory default settings.
Section
Click the Section popup menu to select the section of Artist Transport to assign. Artist Transport sections are Numpad, Soft Keys,
and Wheel.
Shift
Functions can be assigned to the SHIFT key layer. Click on the Shift checkbox to show the SHIFT key assignments.
Soft Key Label
Select a Soft Key (its outline highlights yellow) and type a label in this text field.
Layout
Select Text Only, Icon Only, or Text and Icon from the Layout pop-up menu.
Icon
Click the Icon button and select an icon from the dialog.
Font
Click the Font button and select a font from the dialog.
Color
Click the Color button and select a color from the dialog for the selected key. This color is used to color the key in EuControl, not
on the surface.
The Soft Keys light yellow in their active states and are unlit otherwise. The Transport keys can each light with two colors. The
two outer keys on each side can light yellow or red. The three center keys can light yellow or green. If an alternate color is selected,
the surface key uses the closest allowable color (yellow/green or yellow/red) or defaults to yellow if the color selected is not close
to one of the two allowable colors.
Clear
Press the Clear button to delete the function assigned to the selected key. Once cleared, pressing the selected key does nothing,
unless it is on the Numeric Keypad, in which case the key reverts to entering a numeric value (see “Numeric Keypad” on page 14
for more information).
Artist Transport users should ignore the Surface and Touchscreen sections, which are for Artist Control only.