User guide

Artist Transport User Guide14
Numeric Keypad
The Numeric Keypad allows numeric entry into an application. Press a key on the pad to enter that character. Holding the SHIFT
key down accesses alternate functions on the keypad. The Numeric Keypad can be programmed to provide other functions but
then numerical entry will be overridden. See Chapter 4, “Soft Keys” to learn how to program the keys.
Jog Wheel and Shuttle Ring
The Jog Wheel and Shuttle Ring are similar controls with an important difference:
Turning the Jog Wheel changes the parameter it controls by an amount proportional to how far the wheel is turned. When
the Jog Wheel stops moving, the parameter stops changing.
Turning the Shuttle Ring changes the parameter it controls at a rate determined by its position. The further the Shuttle Ring
rotates, the faster the parameter changes. When held in position, the parameter continues to change at a fixed rate. When
the Shuttle Ring is released, it automatically returns to its center position and the parameter stops changing.
Both the Jog Wheel and Shuttle Ring can be rotated in either direction.
Jog Wheel
The Jog Wheel is typically used to do any or all of the following:
Positioning the cursor in the timeline
Zooming horizontally or vertically
Editing a clip or region
Numeric keypad
Jog Wheel (1) and Shuttle Ring (2)
1
2