Specifications

Artist Series and Pro Tools40
5 Hold Command+Control (Mac) or Control+Start (Windows) and touch the Send name in the
Touchscreen.
Working with Sends on Artist Mix
Assigning Sends on Artist Mix
To assign a send on Artist Mix:
1 Select a track.
2 Press the AUX key.
3 Press both PAGE keys (< PAGE and PAGE >) to enter Send Assign mode. The display shows the cur-
rent (or last viewed) send slot a–j (an 8-fader system will only show slots a–f). To see additional send
slots, press the lit PAGE > key.
4 Press the encoder below desired send slot. For example, to assign a send to the current track in slot
a, press encoder 1. The display above the first three encoders shows the following choices:
5 Do one of the following:
•Press the encoder below no send to leave that slot unassigned.
•Press output to see output bus choices (such as Out 1–2).
•Press bus to see available internal busses.
6 To see additional choices (beyond the number of faders in your system) press the lit PAGE > key.
7 When the desired send is displayed, press its encoder to make the assignment. In that fader strip,
the encoder ON key lights.
To toggle all sends in that same slot (a–j) on all selected tracks, hold Option+Shift (Mac) or Alt+Shift
(Windows) and touch the Send name. To toggle all sends in that slot on all tracks, hold Option (Mac)
or Alt (Windows).
Display no send output bus
Soft Encoder 1 2 3
To assign a send in the same slot to all selected tracks, hold Option+Shift (Mac) or Alt+Shift (Win-
dows) on your computer keyboard while pressing the desired encoder. To assign to all tracks, hold Op-
tion (Mac) or Alt (Windows).