Specifications

Chapter 6: Plug-ins and Sends 39
8 When the desired output or bus is displayed, press the Soft Encoder for the desired choice. A green
dot appears indicating that send bus is now assigned to the currently selected tracks.
Opening and Editing Sends on Artist Control
To access and edit a send on Artist Control:
1 Select a track with send already assigned.
2 Press the SENDS Soft Encoder. The Soft Encoders show assigned sends, and empty slots (a–e, or f–j).
Once in Aux mode, do any of the following to adjust send parameters:
To adjust send level:
 Rotate the encoder for the desired send.
To adjust send pan:
1 Press the encoder for the send you want to adjust.
2 Rotate the Soft Knob for L Pan and/or R Pan.
To mute a send:
 Touch its Soft Encoder in the Touchscreen display (such as Bus 1). Touch again to unmute.
To toggle the send pre- or post-fader:
 Hold SHIFT and touch the Soft Encoder for the send in the Touchscreen (such as Bus 1).
Making Sends Inactive or Active on Artist Control
To toggle a send between active and inactive:
1 Bank to and select the desired track.
2 Press the SENDS encoder.
3 Navigate the Touchscreen until the desired send is displayed.
4 Press both SHIFT keys simultaneously to enable Shift Lock mode (both key LEDs stay lit).
To assign the send to all selected tracks, hold Option+Shift (Mac) or Alt+Shift (Windows) and press
the encoder. To assign the send on all tracks, hold Option (Mac) or Alt (Windows).