Specifications

Chapter 3: Track and Session Basics 11
Viewing EuControl Settings on Artist Transport
On Artist Transport, you can use the SHOW key to view assignments on the unit display.
To view assignments on the controller display:
1 Press the SHOW key.
2 Press any Soft Key, Transport, or numeric key on Artist Transport and its assignment is shown in the
display.
Customizing Controls in EuControl
EuControl software makes it very simple to remap any control to Pro Tools commands and options.
Here is a quick example of how to reconfigure one of the Transport keys on Artist Transport to toggle
Dynamic Transport mode on or off. It shows the steps required to re-assign a single key.
To re-assign a Soft Key on Artist Transport for Pro Tools:
1 Launch Pro Tools.
2 Press the SHOW key. The EuControl Settings window opens.
3 Click to go to the Soft Keys tab. The currently assigned Soft Keys are shown.
Soft Keys tab in EuControl Settings (Artist Transport shown)
If the EuControl Settings window doesn’t look the same as the picture above, check the current setting
of the Section menu located in the upper left of the EuControl Settings window. If necessary, click it
and choose
Softkeys.