Specifications

Artist Series and Pro Tools Guide74
4 To mute, solo, or adjust level for each member of the group, do the following:
• To mute a member of the group, touch its Soft Encoder in the Touchscreen. A green indicator below
the Soft encoder is lit when the track is unmuted, and off when the track is muted.
• To solo a member of the group, hold
SHIFT and touch its Soft Encoder in the Touchscreen. A yellow
indicator above the Soft Encoder is list when the track is soloed, and off when it is not.
• To adjust track level, turn the knob next to its Soft Encoder.
5 To exit and return the Soft Encoders to their previous view, press the BACK key.
Artist Mix
To view tracks in a group assigned to a VCA on Artist Mix:
1 Press SEL on the strip for a VCA master that is assigned to a group to select that VCA track.
2 Press CHAN on the left of the Artist Mix to enter Channel mode.
3 Press SHIFT+PAN/MIX. The display above the knobs shows the members of that group.
4 To mute, solo, or adjust level for each member of the group, do the following:
• To mute a member of the group, press the
On button next to its knob.
• To solo a member of the group, press the
Sel button next to its knob.
• To adjust track level, turn the knob. You can also flip the knobs to the faders by pressing
SHIFT+CHAN/FLIP in order to adjust level from the faders.
5 To exit, press CHAN.
Only the encoders focus on group members; faders remain focused on their currently targeted tracks. To
bank only group members to the faders, use Group Spill (see “Group Spill” on page 37).
SOLOSOLO ON ON SOLOSOLO ON ON SOLOSOLO ON ON SOLOSOLO ON ON