Specifications

Artist Series and Pro Tools Guide64
Opening and Editing Sends on Artist Mix
To access and edit a send (Artist Mix):
1 Bank to and select the desired track.
2 Press the AUX key. Send assignments in slot A are displayed in the track LCD display.
3 To view other sends, press PAGE> until it is displayed (such as Bus 1–2).
4 To adjust send level, rotate the encoder directly below the desired send.
To mute the send:
 Press the ON key in the encoder row directly below the desired send. When muted, the ON key is unlit;
when the send is on, the
ON key is lit.
To toggle the send between pre- and post-fader:
 Press the SEL key in the encoder row directly below the desired send. Sends are post-fader by default,
in which state the
SEL key is unlit. When the send is pre-fader, the SEL key is lit.
To adjust send pan:
1 Press the encoder showing the desired send. If the send is stereo, a single encoder will be mapped to send
pan (usually encoder 8). If the send is three or more channels (such as LCR, or a 5.1 send), additional
send pan parameters become available in the encoders (such as divergence, center percentage, and other
multichannel pan parameters).
2 Rotate the appropriate encoder.
Send level encoder on Artist Mix
SEL
ON
SOLOON