Specifications

Chapter 6: Plug-ins and Sends 63
5 Hold Command+Control (Mac) or Control+Start (Windows) and touch the Send name in the Touch-
screen.
Working with Sends on Artist Mix
Assigning Sends on Artist Mix
To assign a send on Artist Mix:
1 Select a track.
2 Press the AUX key.
3 Press both PAGE keys (<PAGE and PAGE>) to enter Send Assign mode. The display shows the current
(or last viewed) send slot a–j (an 8-fader system will only show slots a–f). To see additional send slots,
press the lit
PAGE> key.
4 Press the encoder below desired send slot. For example, to assign a send to the current track in slot a,
press encoder 1. The display above the first three encoders shows the following choices:
5 Do one of the following:
• Press the encoder below
no send to leave that slot unassigned.
• Press
output to see output bus choices (such as Out 1–2).
• Press
bus to see available internal busses.
6 To see additional choices (beyond the number of faders in your system) press the lit PAGE> key.
7 When the desired send is displayed, press its encoder to make the assignment. In that fader strip, the en-
coder
ON key lights.
To toggle all sends in that same slot (a–j) on all selected tracks, hold Option+Shift (Mac) or Alt+Shift
(Windows) and touch the Send name. To toggle all sends in that slot on all tracks, hold Option (Mac) or
Alt (Windows).
Display no send output bus
Soft Encoder 1 2 3
To assign a send in the same slot to all selected tracks, hold Option+Shift (Mac) or Alt+Shift (Windows)
on your computer keyboard while pressing the desired encoder. To assign to all tracks, hold Option (Mac)
or Alt (Windows).