Specifications

Artist Series and Pro Tools Guide60
6 Press the available (lit) encoder. All available Settings files appear by the encoders. A green dot indi-
cates which preset is currently selected. Press a flashing
PAGE key (<PAGE or PAGE>) to display the
previous or next 8 Settings files.
7 To select a Settings file, or to navigate through a folder of Settings files, press its encoder.
8 Press both PAGE keys (<PAGE and PAGE>) again to exit.
Artist Mix
To select plug-in Settings Files from Artist Mix:
1 Select a track that already has a plug-in inserted.
2 Press the INSERTS switch. Any plug-ins in the current slot on all currently banked channels are dis-
played.
3 Press CHAN to display all plug-ins on the currently selected track.
4 Press the encoder beneath the displayed name of the plug-in you want to edit. The first page of param-
eters for that plug-in are mapped across the encoders.
5 Press both PAGE keys (<PAGE and PAGE>) to enter Config mode. Both PAGE keys flash. The cur-
rently selected Settings file is shown above the first encoder (or if the plug-in is using the factory default
Settings file, the encoder shows
<fctryd>).
6 Press the available encoder. Available Settings files appear above the encoders. A green LED indicates
which preset is currently selected. Press a flashing
PAGE key (<PAGE or PAGE>) to display the previ-
ous or next 8 Settings files.
7 To navigate through a folder of Settings files, or to select a Settings file, press its encoder.
8 Press both PAGE keys (<PAGE and PAGE>) again to exit.
9 To use the plug-in Compare button, adjust one or more plug-in parameters (so that the Compare button
is lit on-screen), press both
PAGE keys, then press the lit ON switch to toggle Compare.