Specifications

Chapter 6: Plug-ins and Sends 59
Using the EQ and DYN Keys
You can use the EQ and DYN keys on the Artist Mix and Artist Control to quickly access inserted EQ or
dynamics plug-ins.
To access an EQ or dynamics plug-in directly:
1 Bank to display a track with an EQ (or dynamics) plug-in inserted.
2 Press the EQ (or DYN) key. The display shows the names of any inserted EQ or dynamics plug-ins, re-
gardless of their slot location (a–f).
3 Press the encoder below the EQ or dynamics plug-in you want to edit.
EQ/DYN Keys and Standard Plug-in Mapping
When you navigate to an EQ or Dynamics plug-in using the INSERTS key, the parameters are arranged
across your hardware controls in a layout unique to that plug-in, and/or its manufacturer.
The
EQ and DYN keys, by contrast, map the parameters of supported plug-ins according to a standard con-
trol layout. This lets the controls appear in the same arrangement across your controller, regardless of the
model or manufacturer.
Selecting Plug-In Settings Files (Presets)
You can select plug-in settings files using Artist Control or Artist Mix.
Artist Control
To select plug-in Settings Files from Artist Control:
1 In the Touchscreen, press the TRACKS key to enter Tracks view mode.
2 Select a track that has at least one plug-in by pressing its channel SEL switch, or by touching that track
on the screen.
3 In the Touchscreen, press the Inserts encoder. The Soft Encoders show the names of all plug-ins inserted
on the selected track.
4 Press the encoder for the plug-in you want to edit. The first page of parameters for that plug-in are
mapped across the encoders.
5 Press both PAGE keys simultaneously (<PAGE and PAGE>) to enter Config mode. Both PAGE keys
flash. The currently selected Settings file is shown next to the first encoder (or if the plug-in is using the
factory default Settings file, the encoder shows <fctryd>).
A green dot next to the displayed Settings file means the Compare button is active (the Compare button
on-screen is blue). To toggle Compare, tap the green dot in the Touchscreen.