Specifications

Chapter 6: Plug-ins and Sends 57
Working with Plug-ins on Artist Mix
This section shows how to use the switches on Artist Mix to access any plug-in inserted on a track.
To access and edit a plug-in on Artist Mix:
1 Bank to and select the desired track.
2 Press the INSERTS key.
If no plug-in is inserted in the current slot, the slot letter appears in lower-case (a, b, c, and so on). Any
plug-ins in the current slot are displayed in the track LCD display. Names are abbreviated as necessary. For
example, if the Compressor/Limiter 3 dynamics plug-in is present in the current slot, the display above its
track shows
CmprsLD.
3 To view other insert slots, press PAGE> until that slot and any assigned plug-ins are displayed.
4 Press the encoder beneath the displayed name of the plug-in you want to edit. The first page of param-
eters for that plug-in are now mapped across the encoders.
5 Press PAGE> (or <PAGE) to access other parameters for the current plug-in.
Assigning Plug-ins on Artist Mix
To assign a plug-in on Artist Mix:
1 Select a track.
2 Press the INSERTS key. The display shows currently assigned plug-ins (or empty slot letter a–j) above
the encoders.
3 Press both PAGE keys (<PAGE and PAGE>) simultaneously to enter CONFIG mode. Insert slots for the
selected track are shown across the display. For example, on a single Artist Mix (eight faders), slots a–h
are shown; to access additional slots (i and j) press the lit
PAGE> key.
Artist Mix INSERTS key
SOLOSOLO ON ON SOLOSOLO ON ON SOLOSOLO ON ON SOLOSOLO ON ON