Specifications

Artist Series and Pro Tools Guide56
The first page of parameters for that plug-in are mapped across the encoders.
5 Press PAGE> (or <PAGE) to access other parameters for the current plug-in.
Assigning Plug-ins on Artist Control
To assign a plug-in on Artist Control:
1 Select a track.
2 Press the Inserts encoder.
3 Press both PAGE keys (<PAGE and PAGE>) to enter CONFIG mode. Insert slots are displayed in the
Touchscreen (a, b, c, and so on), and both
PAGE keys flash.
4 Press the encoder next to the desired insert slot. The Soft Encoders show the next level of choices as
available on your system (including default EQ or DYN plug-ins if applicable).
5 Press the encoder for the desired insert type. The Soft Encoders show the next level of choices such as
EQ, Dynamics, Reverb, and so on. (Choices shown on your system will vary depending on which plug-
ins you have installed, and the Pro Tools setting to organize plug-ins by Category or Manufacturer).
6 When the desired plug-in is displayed, press its encoder again to insert it on the selected track.
Making Plug-ins Inactive or Active on Artist Control
To toggle a plug-in between active and inactive:
1 Bank to and select the desired track.
2 Press the Inserts encoder.
3 Navigate the Touchscreen until the desired insert slot and plug-in name is displayed.
4 Press a SHIFT key to enable Shift mode (press and release quickly so that both SHIFT key LEDs stay lit).
5 Hold Command+Control (Mac) or Control+Start (Windows) and touch the insert name in the Touch-
screen.
For information about plug-in automation, see Chapter 7, “Automation and Mixing.”