Specifications

Chapter 6: Plug-ins and Sends 55
Chapter 6: Plug-ins and Sends
This chapter explains how to assign and adjust plug-ins and sends on tracks.
Working with Plug-in Inserts
This section shows you how to work with plug-ins using Artist Control or Artist Mix.
Working with Plug-ins on Artist Control
To access and edit a plug-in on Artist Control:
1 Bank to and select the desired track by pressing its SEL key.
2 Press the INSERTS encoder.
If no plug-in is inserted in the current slot, the slot letter appears in lower-case (a, b, c, and so on). If any
plug-ins are already assigned in the current slot, the name of the plug-in is shown. Plug-in names are ab-
breviated as necessary. For example, if the Compressor/Limiter 3 dynamics plug-in is present in the current
slot, the display above its track shows
CmprsLD.
3 To view other insert slots, press PAGE> until that slot and any assigned plug-ins are displayed.
4 Press the encoder for the plug-in you want to edit.
Soft Encoder for Inserts
SOFT KEYS
HOME
END
Inserts