Specifications

Artist Series and Pro Tools Guide52
To recall a Layout from Artist Control:
1 From the Touchscreen Page 1 (HOME) press LAYOUTS.
2 Press a Soft Key in the upper part of the Touchscreen to select an available Layout. (Layouts are listed
by their name as shown in the
Layouts tab of EuControl software).
Tracks assigned in the selected Layout appear on their assigned faders.
3 To exit a Layout, recall the Layout we recommended creating above that stores all fader strips <auto as-
signed>
.
Layouts and Banking/Nudging
Once a Layout is recalled, banking or nudging will only move focus by the number of available
(
<auto assigned>) fader strips. For example, if a Layout includes three tracks assigned to faders 1–3 on
Artist Control, pressing
BANK> only banks one fader at a time (since only one fader, number 4, is <auto
assigned>
or “not locked” to a specific track). Note also that it is possible to end up with one track appear-
ing on and being controllable by more than one fader strip. In this case, changes made to one fader are re-
flected in the other.
Track Views for Editing
You can use modifier keys in combination with Artist Series controls to change track views in the Edit win-
dow. This lets you quickly show waveform data in a track.
To change a track view to Volume Automation on Artist Mix or Artist Control:
 Hold Command+Control (Mac) or Start+Ctrl (Windows) and touch the fader for the track SEL key.
To change a track view to Waveform on Artist Mix or Artist Control:
 Hold Command+Control (Mac) or Start+Ctrl (Windows) and press the track SEL key.
For shortcuts to view other types of automation data, see “Shortcuts to Display Automation Playlists” on
page 70.