Specifications

Chapter 5: Editing 49
Using Markers on Artist Control
To create a Marker in Pro Tools with Artist Control:
1 Navigate the Touchscreen to Page 1 (HOME), then press MEM LOC to go to the Memory Loca-
tions/Markers page.
2 Begin Pro Tools playback, or place the Edit cursor at the desired location in the session.
3 When playback reaches the desired location, press CREATE in the Touchscreen.
4 On-screen, configure the New Memory Location dialog as desired. (For information on the options
available in this dialog, see the Pro Tools Reference Guide.)
5 Press the OK Soft Key (below the Touchscreen). Or press Cancel to cancel the new marker.
To recall a Marker using Artist Control:
1 From the Touchscreen Page 1 (HOME) press MEM LOC. The default assignments for this page list the
first 12 markers across the top two rows of Soft Keys. The bottom row of Touchscreen Soft Keys nav-
igate to additional markers (
1–12, 13–24, and so on).
2 Press a Touchscreen button to recall that Marker/memory location (such as <MemLoc1>).
3 To access other memory locations, press the appropriate button along the bottom row of the (default)
Touchscreen. For example, to recall Marker 32, press the key
25–36, then press <Mem Loc32>.
To edit a Marker using Artist Control:
1 From the Touchscreen Page 1 (HOME) press MEM LOC.
2 Press EDIT (the key starts to flash).
3 Press the Touchscreen key for the marker you want to edit (such as <Mem Loc1>).
4 On-screen, configure the Edit Memory Location window as desired.
5 Press the OK Soft Key to confirm your changes (or press Cancel to cancel).