Specifications

Chapter 5: Editing 47
Zoom Horizontally
To zoom horizontally:
1 Press the ZOOM HORIZONTAL key, or assign a key to Zoom Horizontal using EuControl software.
2 Spin the Jog wheel to the left to zoom out horizontally (show more session time), or to the right to zoom
in.
Zoom Verticaly (Adjust Track Height)
To adjust track height (zoom vertically):
1 Place the cursor in the tracks you want to adjust.
2 Press the ZOOM VERTICAL key (on Artist Control, press SHIFT+ZOOM HORIZ), or assign a key to it
using EuControl software.
3 Spin the Jog wheel to the left to zoom out (reduce track height), or to the right to zoom in and increase
track height.
Marking and Moving Selections
To use the wheel for Mark In and Mark Out:
1 From Page 1 of the Touchscreen, press EDITING > WHEEL.
2 Begin playback (press PLAY in the Transport).
3 At the desired selection start point, press the Mark In button in the Touchscreen.
4 At the desired selection end, press Mark Out.
5 Press STOP.
To use the wheel to move a selection:
1 Make a selection within a track.
2 From Page 1 of the Touchscreen, press EDITING > SELECT.
3 Use any of the available Touchscreen buttons as desired. Choices include common selection commands
such as Move Selection Up/Down, Extend Selection Up/Down, Nudge Selection Start Forward/Back,
and more.