Specifications

Artist Series and Pro Tools Guide46
To change Edit Modes using the Soft Keys:
1 Press SHIFT +SOFTKEYS/HOME to return the Soft Keys to their first (home) page.
2 Press the SOFT KEYS V (down) key once to navigate the Soft Keys to the second page. The Soft Keys
display now shows Edit Modes in the upper row.
3 Press the Soft Key for the desired Edit Mode (Shuffle, Slip, Spot, or Grid). To toggle between Absolute
and Relative Grid mode, press the
Grid Soft Key again. In Pro Tools, the Edit Mode display shows Rel
Grid
when that mode is enabled.
Edit/Tool Mode Lock
Edit/Tool Mode Keyboard Lock lets you lock the currently selected Edit Tools (Zoom, Trim, Grabber, and
Pencil only) in place andprevent them from being inadvertently changed to one of their other variants (such
as Zoom changing from Normal Zoom to Simple Zoom).
To lock (or unlock) the current Edit Tool modes:
1 Press SHIFT +SOFTKEYS/HOME to return the Soft Keys to their first (home) page.
2 Press the SOFT KEYS V (down) key once to navigate the Soft Keys to the second page.
3 Press the Soft Key for Edit/Tool Mode Lock.
Using the Jog/Shuttle Wheel
The Jog wheel on Artist Control and Shuttle ring on Artist Transport can perform a variety of functions
such as basic Jog and Shuttle, zooming, and adjusting track height. You can also use it to adjust clip gain
(see “Clip Gain” on page 53).
Jog and Shuttle
To use the Jog wheel to jog and shuttle:
1 Enable Jog mode by pressing the JOG key (if available) or the Soft Key assigned to Jog.
2 Rotate the Jog wheel to jog back or forward.
3 To enable Shuttle mode, press the SHUTTLE key or the equivalent Soft Key, if available.
4 To exit Jog or Shuttle mode, press STOP.