Specifications

Chapter 1: Introduction 1
Chapter 1: Introduction
The Avid
®
EUCON
TM
(Extended User Control) adapter enables fully integrated control of Pro Tools
®
from
EUCON-compatible control surfaces.
In Pro Tools 10 and higher, over 500 Pro Tools commands, shortcuts, and other functions are
EUCONized and available for Touchscreen and Soft Key assignment via EuControl software.
Default Application Sets are installed with EuControl software, and these provide default assignments for
you to start using immediately. You might find the default assignments ideal for your work style. If not, use
the Soft Key Command Editor in EuControl software to customize Touchscreen buttons and Soft Keys to
best suit your projects and workflow.
This guide explains how to enable Artist Series controllers and use them with Pro Tools 10.0 or higher on
supported Mac and Windows systems.
System Requirements and Compatibility
The features described in this guide require the following:
• Artist Series control surface
• Pro Tools or Pro Tools HD version 10.0 or higher
• EuControl software version 2.6.2 or higher
For downloads and other Artist Series resources, visit:
www.avid.com/artistsupport
Avid can only assure compatibility and provide support for hardware and software it has tested and ap-
proved. For complete system requirements and a list of qualified computers, operating systems, hard
drives, and third-party devices for Pro Tools, visit: www.avid.com/compatibility
For setup and configuration instructions for EUCON on Pro Series systems (such as MC Pro,
System 5-MC and System 5) see the User Guide that came with your hardware. For the latest software
updates and information about these Avid control surfaces, visit www.avid.com/proseriessupport.