Specifications

Chapter 4: Recording 41
DestructivePunch
(Pro Tools HD Only)
Artist Control provides default keys for DestructivePunch.
To prepare tracks for DestructivePunch:
1 From Page 1 of the Touchscreen, press MENU > OPTIONS > DestructivePunch.
2 Record enable the tracks you want to punch by pressing their track REC switches.
3 In the Touchscreen, press Prepare DPE Tracks.
To enable DestructivePunch mode (Pro Tools HD only):
 From Page 1 of the Touchscreen, press MENU > OPTIONS > DestructivePunch.
To exit TrackPunch mode
 Press DestructivePunch again.
You can access the
Prepare DPE Tracks command from this same page.
Adjusting Avid PRE Controls
If you use an Avid PRE mic pre, you can control its parameters using Artist Control or Artist Mix.
To adjust PRE controls from Artist Control:
1 Make sure the PRE is correctly installed and configured for remote control from Pro Tools. (For more
information, see the PRE Guide.)
2 Press a channel SEL switch to select an Audio or Auxiliary Input track.
3 Press the Input encoder in the Touchscreen. The Touchscreen now displays all 8 PRE controls in the Soft
Encoders.
4 Turn the encoders to adjust each corresponding PRE control.
To adjust PRE controls from Artist Mix:
1 Make sure the PRE is correctly installed and configured for remote control from Pro Tools. (See the PRE
Guide for more information.)
2 Press a channel SEL switch to select an Audio or Auxiliary Input track.
3 Press the CHAN switch.
4 Press SHIFT+INPUT. The track displays now show PRE controls.
5 Turn the encoders to adjust each corresponding PRE control.
On Artist Transport, you can reassign one of the 12 Soft Keys for DestructivePunch in EuControl.