Specifications

Chapter 3: Basics 35
Existing Group names are listed in the Soft Encoders, starting with the <All> Group in encoder 1. Green
LEDs next to Soft Encoders indicate Group membership for the currently selected track.
3 Press the Soft Encoder for a Group to add the current track to it (the green LED is lit), or remove the
track from the group (no green LED).
To enable or suspend a Group using the Soft Encoders:
1 Press the GROUP encoder to enter Group mode. Group names fill as many Soft Encoders as necessary.
Green LEDs in the Touchscreen encoders indicate group membership for the currently selected track.
2 Hold SHIFT and press the Touchscreen encoder for a group to toggle it between enabled and suspended.
To enable or suspend a Group using the Touchscreen:
1 Navigate to Page 1 of the Touchscreen Soft Keys. This example assumes you are using the default Soft
Key assignments; if you have customized your Soft Keys the exact page or other steps may differ.
2 In the Touchscreen, press GRP EDIT. The Touchscreen displays Soft Keys for each Group across the top
row (such as !
:<ALL>, a:Group1, b:Group2, and so on). These appear on the Touchscreen regardless of
how many Groups you have created in the current session). To navigate to other Groups, press the ap-
propriate key in the bottom row (such as
ALL–11, or 12–23).
3 Press the Touchscreen key for any Group to toggle it between enabled and suspended. When enabled,
the Soft Key for that Group is lit; when suspended, the Soft Key is dark. For example, to toggle Group
1 on/off, press the Soft Key
a:GROUP1.
To rename or edit a Group:
1 On Page 1 of the Touchscreen, press GRP EDIT. The Touchscreen displays a page of Soft Keys specific
to working with Groups.
2 In this page of the Touchscreen, do each of the following:
• Press
MODIFY GROUP. The button flashes.
Soft Encoder for Group
SOFT KEYS
HOME
END
Group