Specifications

Artist Series and Pro Tools Guide30
2 In the Encoders, press the Mix encoder. The Touchscreen shows the output assignment for the currently
selected track.
3 Press Encoder 1 (the one showing the current assignment, if any). The first three Encoders now display
the next level of choices for output assignment.
4 Press Soft Encoder 1 to select no output.
5 Press BACK (each press returns you up one level), or press SHIFT+BACK/TOP to jump back to the top
view.
6 Repeat these steps and choose a new output path.
Routing Track Input and Output on Artist Mix
These examples show how to route track input and output from Artist Mix.
To assign track input on Artist Mix:
1 Select a channel by pressing its SEL key.
2 Press SHIFT+INSERTS/INPUT. The display shows input assignments for banked tracks.
3 Press the Encoder for the track you want to assign. The first three Soft Encoders show the next choices
for input assignment.
4 Press the Soft Encoder below the desired input choice:
• If you select
no input, that encoder ON key lights.
• If you select
interface or bus, available hardware inputs or internal buses are listed above the Soft En-
coders. Press the
<PAGE and/or PAGE> keys to navigate to other input choices.
5 When the desired input source is displayed, press its Soft Encoder. The encoder ON key lights.
6 To exit output assign mode, press PAN.
To assign track output on Artist Mix:
1 Select a channel by pressing its SEL key.
2 Press SHIFT+PAN/MIX. The display shows the output assignment for each banked track.
3 Press the encoder for the track you want to assign.
Display no input interface bus
Soft Encoder 1 2 3