Specifications

Chapter 3: Basics 29
2 In the Soft Encoders, press the Mix Encoder. If it is not shown, press BACK until is appears.
The Touchscreen shows the output assignment for the currently selected track next to Encoder 1.
3 Press Encoder 1 (the one showing the current assignment, if any). The first three Soft Encoders now dis-
play the next level of choices for output assignment.
4 Press Soft Encoder 1, 2, or 3 to select the following as desired:
no output (encoder 1) Assigns no output to the track (the track will be silent).
interface (encoder 2) Displays Output bus choices (such as Out 1–2) in the Soft Encoders.
bus (encoder 3) Displays internal bus choices in the Soft Encoders.
5 To see additional choices, press the lit <PAGE or PAGE> key.
6 When the desired output choice is displayed, press its Encoder. A green LED lights next to the Soft En-
coder, indicating assignment on the currently selected track(s).
7 To exit Output Assign mode, press BACK (each press returns you up one level), or press
SHIFT+BACK/TOP to jump back to the top view.
Multiple Output Path Assignments
Pro Tools tracks can have multiple output paths assigned to them. When assigning track output from a EU-
CON unit, you can simply repeat the previous instructions and the new assignment will be added to the cur-
rent assignments. When reassigning outputs, you must first assign
no output, then assign the new output
path.
To reassign track output without adding additional output assignments on Artist Control:
1 Select a channel by pressing its SEL key.
Soft Encoder for Mix
SOFT KEYS
HOME
END
Mix