Specifications

Artist Series and Pro Tools Guide28
The Touchscreen shows the input assignment for the currently selected next to Encoder 8.
3 Press Encoder 8 (the one showing no input, or the current input assignment, if any).
4 The first three Soft Encoders now display no input, interface, and bus.
5 Press Soft Encoder 1, 2, or 3 to select the following as desired:
no input (encoder 1) Assign no input source to the track.
interface (encoder 2) Displays available hardware input choices on the Soft Encoders.
bus (encoder 3) Displays available internal bus choices on the Soft Encoders.
Artist Control shows up to eight available hardware input or bus choices at a time (one in each Soft En-
coder). You can navigate to additional hardware or bus choices by pressing
<PAGE or PAGE>.
6 When the desired input source is displayed, press its Encoder.
7 To exit Input Assign mode, press BACK (each press returns you up one level), or press
SHIFT + BACK/TOP to exit and return to the top Soft Keys level.
To assign track output on Artist Control:
1 Select a channel by pressing its SEL key.
Soft Encoder for current input assignment.
SOFT KEYS
HOME
END
no input